Exterior House Painting in Scottsdale, Arizona
Professional exterior repaints for Scottsdale homes — stucco, fascia, trim, eaves, exterior doors, garage doors, and perimeter walls. Thorough preparation, quality coatings, and a clean finish that holds up in Arizona's desert climate.
Exterior Specialists
Scottsdale, AZ
What We Paint
Complete exterior painting for Scottsdale homes
An exterior repaint in Scottsdale typically involves more than just the main stucco body of the house. Trim, fascia, eaves, doors, and garage doors all need attention to create a cohesive finished appearance and protect all exterior surfaces.
The condition of existing coatings, the type of substrate, and the extent of any surface damage all affect what preparation is required. We evaluate each project individually and discuss what work is needed before any painting begins.
Stucco Exteriors
The most common exterior finish in Scottsdale. Proper preparation includes inspection, crack evaluation, cleaning, and appropriate coating selection.
Fascia & Eaves
Wood or composite fascia boards and eave soffits are painted as part of a complete exterior repaint to protect against weathering and maintain a consistent appearance.
Trim & Molding
Window trim, door surrounds, and architectural trim details are masked, prepared, and painted to a clean finish.
Exterior Doors
Front doors, back doors, and side entry doors. Includes surface prep, sanding, and appropriate enamel or exterior paint application.
Garage Doors
Single and double garage doors are painted to complement the home exterior. Surface prep and appropriate exterior coatings are used.
Gates & Walls
Perimeter walls, courtyard walls, and metal or wrought iron gates where painting services are offered as part of the project scope.
Preparation Process
What exterior preparation actually involves
Professional exterior painting quality depends heavily on the preparation work that happens before paint is applied. The exact preparation required varies by home — the condition of the stucco, the state of existing coatings, and any surface damage all affect what steps are necessary.
Surface Inspection
We inspect the entire exterior for failing paint, cracks, moisture damage, caulk failure, and any conditions that need to be addressed before painting.
Pressure Washing
Thorough washing removes dust, dirt, chalking, mildew, and contaminants that would prevent new paint from adhering properly.
Scraping & Sanding
Loose, peeling, or flaking paint is removed. Edges are feathered to minimize visible lines under the new coating.
Crack & Damage Repair
Stucco cracks, damaged areas, and deteriorated surfaces are patched and repaired as conditions require. The extent of repair needed varies by home.
Caulking
Gaps at window frames, door surrounds, trim joints, and penetrations are re-caulked to prevent moisture intrusion and improve the finished appearance.
Masking & Protection
Landscaping, windows, fixtures, hardscape, and adjacent surfaces are carefully protected before any paint is applied.
Priming
Bare surfaces, repaired areas, and substrates with adhesion concerns are primed before topcoats are applied. Not every surface requires primer.
Paint Application
Topcoats are applied using appropriate tools and techniques for the substrate and coating type. Application method affects the final appearance and durability.
FAQs